S. M. Adhesives
Khed, Ratnagiri, Maharashtra
GST No. 27AEKPA3220L1ZQ
TrustSEAL Verified
Call 0804762548447% Response Rate
SEND EMAIL

Waterproofing Service

Our product range includes a wide range of cement based waterproofing services, waterproof coating services, metal roof waterproofing services, terrace membrane waterproofing service, poly sulphide sealant and epoxy grout.

Cement Based Waterproofing Services

Cement Based Waterproofing Services
  • Cement Based Waterproofing Services
  • Cement Based Waterproofing Services
Get Best Quote
Approx. Price: Rs 25 / sq ftGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity100 sq ft
BrandSMACSIL
Usage/ApplicationConcrete
FormLiquid
Shelf Life12 Months In Sealed Containers
Warranty5 Years
Pot Life30 minutes
Packing20 Kg Bucket
Application MethodRoller & Brush
WaterproofYes
Country of OriginMade in India

ELASTOCOAT is an acrylic polymer modified for waterproofing applications in combination with cement. It forms a tough and elastic layer which is waterproof. It allows the coated surface to breath and resists mild acids and alkalies.
Advantage:
Excellent waterproofing performance
Excellent UV stability
Excellent compatibility with most building materials
Good flexibility
Breathable waterproof coating: allows water vapours to go out
Excellent abrasion resistance
Resistant to mild acids and alkalies

Application Procedure:
While applying ELASTOCOAT, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water.
Fill all the cracks, honey-combs, voids etc using cement mortar or our BONDCRETE RP repair compound. Let the surface dry completely. Mix 1 part ELASTOCOAT with 1 kg OPC or PPC thoroughly. Apply this slurry coat by brush over the surface. Allow the surface to be touch-dry. Apply the second coat over the first coat, preferably in a perpendicular direction to the first coat. Let the system set for 24 hours. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight Of heat. Cure the treatment by water for 3 days. Let the coat air-dry after that. Wash hands and tools with plenty of water and Soap.
Application:
Damp-proofing of walls
Old and new concrete slab waterproofing
Water tank waterproofing
Toilet waterproofing
Parapet waterproofing

Caution:
Use protective gloves while mixing and applying ELASTOCOAT. Usual cement handling procedures should be followed. Avoid accidental ingestion and skin contact. If it occurs, consult a physician immediately. Wash hands and tools with plenty of water and soap.

Request
Callback
Yes! I am Interested

Waterproof Coating Services

Waterproof Coating Services
  • Waterproof Coating Services
  • Waterproof Coating Services
Get Best Quote
Approx. Price: Rs 30 / sq ftGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity100 sq ft
ColorWhite
TypesAcrylic
UsageIndustrial
Usage/ApplicationRoofs
BrandSmac
FormLiquid
WaterproofYes
Application MethodRoller & Brush
Warranty5 Years
Packing5 L Can
Country of OriginMade in India

Description:

SMAC ® BONDCRETE HR is a super-polymer modified heat resistant waterproof coating for cementitious substrates. It is a Nano-technology and Multi-ceramic technology based high performance surface coating, specially tailored for Indian climatic conditions.

Working Principles:

When SMAC ® BONDCRETE HR is applied on cementitious surface, Nano- technology based Intelligent Chemicals react with cementitious materials and the nano-particles penetrate into capillaries. There, these reaction complexes & nano-phases create hydrophobicity.

Multi-ceramic technology based particles remain active on the top and bottom surface of the formed coating. This ceramic particle layer is 100% inert and non-conductive in nature. Hence SMAC ® BONDCRETE HR treatment gives high water resistance as well as heat resistance property.

Application Procedure:

First remove all loose particles and remove oil, grease and other loose materials contaminated on the surface. Clean the surface by water. Fill all the cracks, honey-combs, voids etc using cement mortar or our BONCRETE RP repair compound. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to SSD (saturate surface dry) condition. Apply one coat of SMAC ® BONDCRETE HR by brush. Second coat should be applied when the first coat is slightly tacky to touch, preferably in a perpendicular direction to the first coat.

Coverage:

Approx. 20 sq.ft. in two coats on horizontal surface and 30 sq.ft. in two coats on vertical surface.

Advantage:

Heat reduction up to 20% from treated roof slab

Excellent waterproofing qualities

Allows “breathing” of cementitious substrate; minimizes condensation

Excellent Ultra-violet radiation stability

Excellent bond with common building materials like plaster, concrete,china mosaic, tiles etc.

 

Application Areas:

All cementitious surfaces

China chip surfaces e.g.parapet wall, slabs etc.

New & Old terrace slabs

Exterior walls

Request
Callback
Yes! I am Interested

Metal Roof Waterproofing Services

Metal Roof Waterproofing Services
  • Metal Roof Waterproofing Services
Get Best Quote
Approx. Price: Rs 35 / sq ftGet Latest Price
Product Brochure

Product Details:

Packaging Size600 ml
BrandS.M. Adhesives
Packaging TypeBucket
Application IndustryJoint filling
Surface Of ApplicationUsed in crack-filling marks. Can be installed on damp plaster or concrete also., Plastic, Metal, Ceramic
Grade StandardIndustrial
Operating Temperature30 degree Celsius
Curing Time2 hours
AppearanceMatt
ColorIndustrial Grey and Off White
FormLiquid
Country of OriginMade in India

Polyurethane Sealant (SMAC® ELASTOSEAL) has earned loads of accolades to the firm as there is no alternative available. The unmatched quality and unmatched performance has also played a vital role in the enhancement of the demands of the Polyurethane Elastomeric Sealant in the Indian Market. In addition to this, catering the exact requirements of the clients, the company is listed as one of the preeminent Concrete Joint Sealant Manufacturers, based in Mumbai (Maharashtra).
Request
Callback
Yes! I am Interested

Terrace Membrane Waterproofing Service

Terrace Membrane Waterproofing Service
  • Terrace Membrane Waterproofing Service
Get Best Quote
Approx. Price: Rs 40 / sq ftGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity5000 sq ft
Service LocationPan India
Type Of ConstructionResidential
Waterproofing TypeSheet Membrane
FeaturesCost Effective
Service ModeOnsite
BenefitHeat proof

We are engaged in offering Terrace membrane waterproofing service to our clients. Our range of all products is widely appreciated by our clients.                                                              

Request
Callback
Yes! I am Interested

Poly Sulphide Sealant

Poly Sulphide Sealant
  • Poly Sulphide Sealant
Get Best Quote
Approx. Price: Rs 250 / KgGet Latest Price

Product Details:

Packaging Size5 kg
Packaging TypeBucket
Application IndustryJointing
Grade StandardChemical
StrengthMedium
Curing Time2 - 3 hours
Country of OriginMade in India

We are engaged in offering Poly Sulphide Sealant to our clients. Our range of all products is widely appreciated by our clients.
Request
Callback
Yes! I am Interested

Epoxy Grout

Epoxy Grout
    Get Best Quote
    X

    Explore More Products

    View All Products




    Reach Us
    Atul Awade (Owner)
    S. M. Adhesives
    Plot No. B-82, Lote Parshuram, Midc, Tal. Khed
    Ratnagiri - 415722, Maharashtra, India


    Call Us


    Send E-mail